PAS 68 / IWA 14 hostile vehicle mitigation in Kingston upon Thames
Crash-rated bollards installed to the test certificate's foundation spec. For public realm, government and event protection.
Kingston upon Thames Bollard Fitters
Need a bollard installed in Kingston upon Thames? Send the site postcode and a brief through the form on this page. We come back in writing with the bollard spec, the foundation depth, the surface reinstatement and the price — all on the quote.
Bollard fitting in Kingston upon Thames, in plain English
Kingston upon Thames sits in Greater London, and we cover the town and the wider KT-area catchment. Typical Kingston upon Thames sites include Eden Walk, the Bentall Centre and the riverside trade units.
For automatic bollards in Kingston upon Thames we wire in loop detectors, fobs, intercoms or ANPR depending on how the site needs to manage access. We service them too, so you've got someone to call when a unit stops cycling.
For schools and nurseries in Kingston upon Thames we typically install removable or telescopic bollards on access points, with reflective banding and surface reinstatement that doesn't leave a trip hazard. Safeguarding sign-off is straightforward when the install is done properly.
Facilities teams in Kingston upon Thames usually want a single point of contact for survey, install and servicing. That's how we run jobs by default. One quote, one crew, one warranty document — not a chain of subcontractors.
Foundations matter more than the bollard itself. We core to the diameter and depth the manufacturer specifies, set in the right grout or concrete mix and reinstate the surface to match — tarmac, concrete, block paving or resin.
Bollard types we install in Kingston upon Thames
Telescopic bollard installation in Kingston upon Thames
Drop-down post that sits flush in a sub-surface housing. Good where access patterns change daily and you don't want a bollard lying on the floor.
Automatic / rising bollards in Kingston upon Thames
Hydraulic or electromechanical, with control panel, loops, fobs, intercoms or ANPR. We handle civils, wiring and commissioning.
Bollard repair and replacement in Kingston upon Thames
Damaged post replacement, foundation repair, repaint, reflective banding and like-for-like reinstatement.
Fixed bollard installation in Kingston upon Thames
Steel and stainless posts root-fixed or core-drilled into concrete for permanent perimeter protection. The default for shopfronts and column protection.
Removable bollard installation in Kingston upon Thames
Cast-in ground socket with a drained sump, padlocked head, spare keys supplied. Right for forecourts and private parking that occasionally need access.
Where Kingston upon Thames bollards usually go
- Stadiums and event spaces
- Hotels, restaurants and leisure
- Petrol forecourts and EV bays
- Private residential and gated drives
- Government, MOD and embassies
- Shopfronts and retail units
- Hospitals, clinics and care homes
- Logistics yards and depots
Practical install notes for Kingston upon Thames
Removable post sockets in Kingston upon Thames sites are installed with a drained sump and a labelled key. Keys are commonly lost; we supply spares with every install.
Foundation depth on a standard 168mm steel post in Kingston upon Thames is typically 600–750mm into a freshly cored hole, set in a fast-curing structural mix. Crash-rated foundations are deeper and follow the test drawings exactly.
How a bollard install in Kingston upon Thames runs
- 1. Get in touch through the form with your Kingston upon Thames site details and a few photos if you have them.
- 2. We come back the same or next working day to confirm next steps and book the survey.
- 3. Site survey: services check, ground check, measurements, photos.
- 4. Written quote with the bollard spec, foundation method and lead time.
- 5. Install day: clean works, photographs at handover, area left tidy.
Things people ask before a Kingston upon Thames bollard install
Do you handle planning or permits in Kingston upon Thames?
On highway-adjacent or council-owned land in Kingston upon Thames, yes — we'll apply for the permit and price it into the quote. On private land it's usually not needed.
Can you install crash-rated PAS 68 bollards in Kingston upon Thames?
Yes. PAS 68 / IWA 14 schemes have to be installed to the foundation depths in the test certificate, which usually means deeper cores and different fixings. We've installed plenty.
What spacing do you use between bollards?
For pedestrian-permeable lines we typically space at 1.2m centre-to-centre. Where the brief is to stop a vehicle squeezing through, spacing comes in tighter and the post diameter goes up.
How do I get a quote for Kingston upon Thames?
Use the quote form on this page with the Kingston upon Thames site postcode and a short brief. We'll come back in writing with a quote and the recommended bollard spec.
What if my insurer needs a specific bollard spec?
Send their requirement with the brief. We'll price a quote that matches the spec they want to see, with documentation you can pass back to them.
Do you maintain automatic bollards too?
Yes. Hydraulic and electromechanical bollards need annual servicing to stay reliable. We service systems we install and systems put in by other contractors.